Rechercher une page de manuel
vpo.4freebsd
Langue: en
Version: 300761 (debian - 07/07/09)
Section: 4 (Pilotes et protocoles réseau)
BSD mandoc
NAME
vpo - parallel to SCSI interface driverSYNOPSIS
device vpoFor one or more SCSI busses: device scbus
DESCRIPTION
The driver provide access to parallel port Iomega Zip and Jaz drives.HARDWARE
The driver supports the following parallel to SCSI interfaces:- Adaptec AIC-7110 Parallel to SCSI interface (built-in to Iomega ZIP drives)
- Iomega Jaz Traveller interface
- Iomega MatchMaker SCSI interface (built-in to Iomega ZIP+ drives)
USAGE
The driver should let you use a printer connected to the drive while transferring data.DOS and Fx file systems are supported. When mounting a DOS file system or formating a Fx file system, check the slice of the disk with the fdisk(8) utility.
In order to unixify a ZIP disk, put the following in /etc/disktab:
zip|zip 100:\ :ty=removable:se#512:nc#96:nt#64:ns#32:\ :pa#196608:oa#0:ba#4096:fa#512:\ :pb#196608:ob#0:bb#4096:fb#512:\ :pc#196608:oc#0:bc#4096:fc#512:
and use bsdlabel(8).
If you have trouble with your driver, your parallel chipset may not run properly at the detected mode (NIBBLE, PS2 or EPP). Tune the ppc(4) bootflags to force other modes.
SEE ALSO
da(4), lpt(4), ppbus(4), ppc(4), scsi(4)HISTORY
The manual page first appeared in Fx 3.0 .AUTHORS
This manual page was written by An Nicolas Souchu .BUGS
During boot, the driver first tries to detect a classic ZIP, then a ZIP+. The ZIP+ detection is intrusive and may send erroneous characters to your printer if the drive is not connected to your parallel port.Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre